Hot Knife Cutter and Heat Sealing Systems The machine is a microprocessor controlled cutting machine designed and manufactured in Denmark. It measures and cuts almost any type of synthetic strip material from thin ribbons to heavy webbings with an electrically heated, compressed air driven knife. An extractor fan is built into the machine for exhausting the fumes generated by the melting material. The machine can measure and cut small or large quantities of strip materials up to125mm wide, in length from 1mm to 99.9 metres and produce consistently accurate lengths and high quality cuts. Frequently used lengths can be stored in the machines memory for instant recall. There are eight memories available for this purpose. The machine is portable and weighs approximately 20Kg. It can be mounted on a table or bench and requires only 230V/50Hz mains socket and a clean, dry compressed air supply. TYPE SC430SPT Hot Knife Cutter FACT SHEET Hot Knife Cutter PRINT COPY Front Page - Hot Knife Cutting Machines - Cold Knife Cutting Machines - Ultrasonic Knife Cutting Machines Heavy Duty Cold Knife Cutting Machines - Flexi Hot, Cold and Ultrasonic Knife Cutting Machines Hole Punching and Marking Machines - Hot Foil Printing and Marking Machines - Angle Cutting Machines - Slack Feeder Machines Manual Web Cutting Machines - Cutting Machines Accessories - Cutting Machines Spare Parts - Cutting Machines Gallery - Contact Copyright © 2004 Suhr A/S, Biskop Svanesvej 21, DK-3460 Birkerød, Denmark. CVR no.: 20 56 98 16.